Rittal's Mobile Design Center Tours the Country

Mobile Deisgn CenterRittal Corporation is reaching out to its customers with the introduction of its Mobile Design Center (MDC). Equipped with a wide range of Rittal industrial enclosures, human-machine interface (HMI) and power distribution products, the 36 ft. long x 13 ft. high x 8 ft. wide MDC will be traveling to customer sites across the U.S. during the next nine months to give customers a close-up look at Rittal products. Customers will also have the opportunity to meet with a sales representative and collect literature about the different Rittal product lines. MDC planns to tour 33 states.

Recently, the MDC left on its first tour with stops planned in 22 cities across Ohio, Indiana, Michigan, Pennsylvania, New York, New Jersey, New Hampshire, Connecticut and Massachusetts during a five-week period. The second tour is set to begin in November and is planned for six weeks. It will cover Virginia, the Carolinas, Georgia, Florida, Alabama, and Tennessee. The third tour will begin in January 2011 with scheduled stops in the south central and southwest U.S. The MDC will then travel on to the west coast to the northwest U.S., followed by stops in the upper to the lower Midwest by the summer of 2011.

The mobile center is designed to be fully self-contained with an on-board diesel generator. It also features onboard video and wireless capabilities. It houses a wide variety of Rittal products, including:

  • TS8 floormount, freestanding and networking enclosures
  • AE, KS, CM and WM wallmount enclosures
  • EB and JB hinge cover junction boxes
  • KL and PK screw cover junction boxes
  • Wallmount air/air and air/water heat exchangers
  • Optipanel HMI enclosure
  • TopConsole System
  • TS8 Ri4Power low-voltage switchgear
  • TS8 RiLine60 busbar system

For more information about Rittal Corporation and its products, please visit www.rittal-corp.com or call 1-800-477-4000.

More News:

  • Pepperl+Fuchs' New 5500 Type Z/ Ex Pz Smart Purge System

    Pepperl+Fuchs' New 5500 Type Z/Ex Pz Purge System is Designed to Help OEMs, Panel Builders and Just About Anyone Dealing With Haz-loc Areas by Making this Type of System Easy to Implement

  • WEG Electric Introduces the CFW500 Machinery Drive

    WEG's engineers specifically designed this new drive with increased features that focus on the machinery manufacturer's needs. It is simple, efficient, flexible and can be commissioned quickly and easily.

  • Manufacturing Technology Orders Down in May 2014

    Expectations for the 2014 manufacturing technology market were for a soft first half of the year, followed by a stronger second half. The fluctuations seen in the past few months are on track with forecasts, and all indications are that U.S. manufacturing activity is and will remain strong

  • Fast 2014 Start for NA Robotics

    A record 14,135 robots, valued at $788 million were ordered from North American robotics companies in the first half of 2014, an increase of 30% in units and 16% in revenue over the same period in 2013.

  • WEG Electric Introduces the CFW100 Mini Drive

    Programing is easy with the built in keypad that monitors two different parameters at the same time along with operation status, alarms and faults.

  • New and Noteworthy: Ocean Data Systems Develop Specialized Survey and Omega Engineering Receives Honorable Mention

    Omega Engineering received an Honorable Mention in the 2014 Best of Sensors Expo Innovation Award for its M12LCP thermocouple probes with high- temperature M12 molded connectors. The Gold Award winner was AG-SL900A EPC sensor tag and data logger IC from ams.

  • IMTS Will Land Big Footprint in Chicago

    The IANA pavilion will showcase the newest technologies focusing on new ideas and topics ranging from resource-efficient manufacturing and network security to secure industrial control systems and big data. In addition to more than 120 vendors from 16 countries, who will demonstrate their products and services, IANA will host the Global Automation and Manufacturing Summit, Motion, Drive & Automation Conference, and ISA training program.

  • NI Week Aids Industrial IoT Convergence

    Truchard reported that NI divides IoT into industrial IoT and consumer IoT, and this industrial side is focused on using big analog data, analytics, distributed timing and synchronization, and intelligence via cyber-physical systems to help factories, power grids, cities and machines work better.

  • Infographic: Internet of Things - What The Future Will Be Like

    The past 25 years of Internet growth was fueled by human communications. The next 25 years of Internet growth will be fueled by machines. How is the Internet going to affect us and what we do?

  • Bits and Bytes: Moxa Gets UL Certification; Fieldbus Int'l and Fieldbus Inc. Enter Strategic Alliance, and More

    Lemo, a Swiss designer and manufacturer of custom connectors, acquired Northwire, U.S. specialty cable manufacturer of wire and multi-conductor cable and retractiles for the medical, aerospace and defense, energy and industrial markets.

All news »

What are your comments?

You cannot post comments until you have logged in. Login Here.


No one has commented on this page yet.

RSS feed for comments on this page | RSS feed for all comments