RSS
Print pageSensaGuard family of RFID-coded safety switches
REDUCE WIRING COSTS
SensaGuard family of RFID-coded, non-contact safety switches reduce troubleshooting and machine wiring costs. They are Category 4/SIL 3 rated switches per EN954-1, TUV functional safety approved to IEC61508. Unlike lower rated switches, the SensaGuard will shut down a machine if a failure occurs before there is a demand on the safety device. They are especially suited for machines where multiple access doors must be monitored up to a Safety Category 4/SIL 3.
Rockwell Automation; 800/223-5354; www.rockwellautomation.com
Company Information
1202 South Second St.
Milwaukee, WI 53204 (see map)
Phone: (800) 223-5354 Ext. 2055
Website: www.rockwellautomation.com/go/presensaguard
Related Products
- IDEC's XA and XW E-stop switches
- Pepperl+Fuchs' AS-Interface signal towers
- Arc-Flash Detection Relay From SEL
- GarrettCom's CrossBow NERC CIP solution
- Pilz Automation Safety PNOZsigma series of safety relays
- APEM Components' IR Series pushbutton
- WAGO's 750-645 2-channel vibration and roller bearing monitoring module
- Eaton's Motor Insight motor protection solution
- Rockwell Automation's CENTERLINE 2500 motor control center with ArcShield option
- Bosch Rexroth's podcast on lean manufacturing
- All products »
Sponsored Links
Control Design Digital Edition
Access the entire print issue on-line and be notified each month via e-mail when your new issue is ready for you. Subscribe today.
- Featured White Papers
