Infographic: What Type of Digital Bus Do You Use for Motion Control? (2014)

Feb. 12, 2014
February 2014 Survey Results Show 44% of Respondents Who Use a Digital Bus Indicated Use of EtherNet/IP

An electronic survey of Control Design readers was conducted in February 2014 in order to identify usage and application trends in motion, drives and motor technology among the industrial machine builders that comprise Control Design's readership.

Respondents who use a digital bus indicated use of EtherNet/IP at 44%; CAN/CANopen at 16% and SERCOS/SERCOS III at a further 4%. The remaining digital bus usage for motion control showed EtherCat 8%, Powerlink, (8%), Profinet (6%) and CC-Link (6%).

Reall all survey results.

Sponsored Recommendations

Engineer's Guide to Advanced Motion and Mechatronics

This guide will examine the remaining differences between stepper and servo motors, new perspectives on motion control, the importance of both gentleness and accuracy with linear...

eBook: Efficient Operations: Propelling the Food Automation Market

For industrialized food production sectors, the megatrends of sustainable practices, digitalization and demand for skilled employees are underpinned by rising adaptability of ...

2024 State of Technology: Report: Sensors, Vision & Machine Safety

Manufacturing rarely takes place in a vacuum. Workers must be protected from equipment. And equipment must be protected. Sensing technology, vision systems and safety components...

Enclosure Cooling Primer

Learn more about enclosure cooling in this helpful primer.