Wireless Options and Standards

Nov. 4, 2013
How to Select the Right Wireless for Your Application
About the Author

Jim Montague is the executive editor for Control. Email him at [email protected].

So you want to go wireless? Well, you'd better select the right one for your application — and make sure not to install any of your antennas under a conveyor. Here are some of the main options:

  • Bluetooth is a standard for exchanging data over short distances by using short-wavelength radio transmissions in the 2,400- to 2,480-MHz ISM band to create personal area networks (PANs). It's based on the Institute of Electrical and Electronics Engineers 802.15.1 standard that is no longer maintained, but is managed by the Bluetooth Special Interest Group.
  • Wi-Fi is defined by the Wi-Fi Alliance as any WLAN product based on the IEEE 802.11 standards that allows an electronic device to exchange data or connect to the Internet wirelessly using radio waves with a typical operating range of about 65 feet.
  • ZigBee is a specification for protocols used to create PANs built from small, low-power, digital radios and is based on the IEEE 802.15 standard, which is also the foundation for WirelessHART and ISA100 devices. Though low-powered, ZigBee devices often transmit data over longer distances from 10 to 100 meters by creating a mesh network that passes data through intermediate devices. It's supported by the ZigBee Alliance.
  • 6LoWPAN stands for IPv6 over low-power, wireless PANs, and it is supported by a working group at the Internet Engineering Task Force, which has defined encapsulation and header compression mechanisms that allow IPv6 packets to be sent and received via IEEE 802.15.4 networks.
  • Traditional 2.4- and 5.8-GHz radios, 3G and 4G cellular, and satellite networking methods include wide ranges of long-distance, RF and subscriber-based communications.

This article is a part of the Industrial Networking Quarter 4 cover story, "Wireless Makes It Simple."

About the Author

Jim Montague | Executive Editor, Control

Jim Montague is executive editor of Control. He can be contacted at [email protected].

Sponsored Recommendations

Power Distribution Resource Guide

When it comes to selecting the right power supply, there are many key factors and best practices to consider.

Safe Speed and Positioning with Autonomous Mobile Robots

Here are some tips for ensuring safe speed and positioning for AMRs using integrated safety technology – many of these tips also apply to automated guided vehicles (AGVs).

Faster, Accurate and Reliable Motion Control With Advanced Inductive Technology

This white paper describes new technology offering improved position measurement capabilities in reliability, speed, accuracy and more.

The Value of Dual Rated AC/DC Disconnect Switches

Why is it necessary for me to have a disconnect switch installed in my application?