Two Avenues to Machine Efficiency and Sustainability

April 11, 2013
There Is the Easy Way and/or Hard Way. Which Route Will You Take?
About the Authors

Jim Montague is the executive editor for Control. Email him at [email protected].

Though many variations and alternate routes exist, there are two main avenues to machine efficiency and sustainability. You can travel on one, the other or both at the same time.

SEE ALSO: On the Road to Green Machines

The first path is easier because it involves mainly picking the low-hanging fruit of efficiency, which typically aren't too difficult to implement in many machines:

  • More efficient motors and drives.
  • Right-sized components that avoid overuse of energy, materials and other resources.
  • Pneumatics and related devices monitored for leaks and power drains.
  • Reduced and simplified wiring with fieldbuses and Ethernet.
  • Schedule and turn off machines or production zones when not in use.

The second path is more difficult because it means going after fruit that’s higher up on the sustainability tree. These projects require more thought and effort, as well as earlier collaboration with end users, but the potential payback is huge. They can include:

  • Redesigned basic machine movements, spatial configurations, operating formats and operations.
  • Servo motors and drives for more accurate, quicker and more complex motion tasks.
  • Robots for flexible and integrated production work and product handling.
  • Methods to handle end products that reduce raw material use and waste during production.
  • Design to enable machine users to produce end products that are more sustainable themselves and allow consumers to live more sustainably, too.

This article is part of the April 2013 cover story "Get Your Machine to a More Efficient Place."

About the Author

Jim Montague | Executive Editor, Control

Jim Montague is executive editor of Control. He can be contacted at [email protected].

Sponsored Recommendations

Programmable logic controllers (PLCs) and programmable automation controllers (PACs) provide viable options for machine control. This Control Design collection explains the differences...
The essential tips for using Panametrics moisture analyzers to ensure product quality, reduce waste, and lower costs. How to select the right technology, fine-tune calibration...
Motion control engineers tend to focus on torque and speed specifications during the design process, but often fail to notice the unique features that differentiate a high-quality...
Covering the basics of choosing the right position feedback option for your application.