1660319420912 5ifyouuseadigitalbus

Infographic: What Type of Digital Bus Do You Use for Motion Control?

Oct. 22, 2013
36.7% Survey Respondents Indicate Using EtherNet/IP

An electronic survey of Control Design readers was conducted in February 2013 in order to identify usage and application trends of motions, drives and motors among the industrial machine builders that comprise Control Design's readership.

Respondents who use a digital bus indicated use of EtherNet/IP at 36.7%; CAN/CAN open at 10% and SERCOS/SERCOS III at a further 10%. The remaining digital bus usage for motion control showed DeviceNet (8.3%), EtherCat 8.3%, Powerlink, (3.3%), and Profinet (6.7%).

Read all results from the survey.

Sponsored Recommendations

Programmable logic controllers (PLCs) and programmable automation controllers (PACs) provide viable options for machine control. This Control Design collection explains the differences...
Motion control engineers tend to focus on torque and speed specifications during the design process, but often fail to notice the unique features that differentiate a high-quality...
Covering the basics of choosing the right position feedback option for your application.
This white paper describes advantages of using advanced angle sensor technologies and focuses on best practices for correctly implementing non-­contact and touchless angle sensors...