Get in Your Suppliers' Heads

June 13, 2012
Believe it when I tell you that the automation vendors take the results of our annual Readers' Choice balloting pretty seriously. More than a few product managers and marketeers alike get a bit nervous about how the voting might go. It's a great opportunity for you to collectively let suppliers know, in some cases by voting for somebody else, how you think they're doing.
Believe it when I tell you that the automation vendors take the results of our annual Readers' Choice balloting pretty seriously. More than a few product managers and marketeers alike get a bit nervous about how the voting might go. It's a great opportunity for you to collectively let suppliers know, in some cases by voting for somebody else, how you think they're doing.If you specify, purchase or otherwise influence the automation system components that end up on your machines, then you'll soon be receiving a link to the 2012 Readers' Choice Awards Ballot. Your job: to tell us what suppliers give you the best technology value and service and support in about 50 product categories. Ballot is pretty simple. Shouldn't take more than 10 minutes.One or more of you will win a new iPad for participating. If you don't get an invite, and you think you should have, let me know at [email protected]

Sponsored Recommendations

2024 State of Technology: Report: Sensors, Vision & Machine Safety

Manufacturing rarely takes place in a vacuum. Workers must be protected from equipment. And equipment must be protected. Sensing technology, vision systems and safety components...

Enclosure Cooling Primer

Learn more about enclosure cooling in this helpful primer.

Ultra-fast, ultra-accurate linear indexing

NSK integrates advanced automation and drive technologies to deliver high capacity, high speed, ultra-precise indexing and positioning in a compact, flexible linear actuator: ...

Non-Metallic Enclosures Compared to Metallic Enclosures

What you want from your enclosure is long-term, productive service. Knowing your application, enclosure materials and the environment in which it will be located will help.