Applied Motion Products

Products

Applied Motion Products MDX+ series combines a servo drive, motor and encoder into a single unit, offering power options from 100 W to 550 W and supporting control methods like...
April 4, 2024
These integrated motors feature multi-turn, absolute encoders that do not require batteries or external power to track position when the motor is powered off
Feb. 10, 2021
UL-recognized MDX integrated servo motors combine a high-torque density, low-inertia servo motor with an onboard drive and controller
July 30, 2020
These IP65-rated stepper motors are dustproof and resistant to water pressure impact, making them well-suited for use in wet and dusty applications
Feb. 1, 2020
The SSDC series of StepServo drives is equipped with increased digital inputs and outputs such as secondary encoder inputs for dual position-loop control
Dec. 17, 2019
The MDX integrated servo motors provide design modularity and simplicity for a range of applications
Dec. 1, 2019
These StepServo closed-loop integrated motors are designed for closed-loop servo control of position, velocity and torque, resulting in high acceleration rates and fast machine...
Oct. 26, 2019
The TSM14POE StepServo integrated motor with Power over Ethernet (PoE) functionality offers a complete motion control solution with a motor, encoder, drive and controller combined...
Sept. 14, 2019
A range of servo drives, stepper drives and integrated motors conform to the ODVA specification for EtherNet/IP communications
Aug. 6, 2019
These compact, lightweight step motors are available in NEMA sizes 8, 11 and 14 for applications with limited space
June 23, 2019

Additional content from Applied Motion Products

These three models of StepServo integrated motors support step and direction, streaming commands, fieldbus communications and stored Q programming for standalone operations
Sept. 15, 2018
Creating peak torques up to 50% higher than holding torque, TBSM11 linear actuators accelerate and decelerate fast, making them suitable for high-throughput processes that require...
Aug. 22, 2018
Strac stepper drives feature advanced microstepping performance and current control with anti-resonance designed to improve motor smoothness and torque over a wide speed range...
July 19, 2018
The daisy-chain board connector for NEMA 11 frame StepServo integrated motors separates communication terminals into two standalone power and I/O connectors, making it easier ...
Feb. 15, 2018
The StepServo integrated motor uses Heidenhain’s Renco-brand RCML 15 rotary encoder inside an Applied Motion Products motor with added closed-loop servo firmware
Sept. 25, 2017
The SV200 servo drive offering has been updated with drives designed for use in dc-powered applications
Sept. 19, 2017
This series of drives and motors with EtherCAT communications use Applied Motion’s StepServo technology, which combines the high torque capabilities of step motors with the closed...
Feb. 9, 2017
These StepServo motors offer integrated motor design with high-resolution incremental encoder and closed-loop servo firmware
April 15, 2016
All-in-one motor/drive technology and include NEMA size 17 and 23 options
Feb. 18, 2015
BL series brushless dc motors for speed-control applications include six 57-mm and 80-mm motors, ranging from 60 to 300 W with continuous torques of 21 to 102 oz-in.
Oct. 13, 2014
These motors are available in single or double shaft versions with additional encoder or encoder and cover options.
Dec. 12, 2013
Units provide 340 oz-in. holding torque, are available with Ethernet or RS-232 communication.
Sept. 20, 2013