EZAutomation Detachable-front HMI

The EZ7 is an HMI in two parts; the front end with vulnerable components—the touchscreen and LCD displays—and the back end, which houses the rest of the electronics
May 17, 2021

The EZ7 is an HMI in two parts; the front end with vulnerable components—the touchscreen and LCD displays—and the back end, which houses the rest of the electronics. A panel cutout is not needed. Just a ¾-in hole with a grommet is needed to pull an HDMI cable through to connect the two. Both ends are stud-mounted to the control panel. When the front end goes bad, it takes less than two minutes to replace it with a new one without disconnecting any cables from the back end. The front end is all metal with a NEMA 4X Class I, Div. 2 rating.

Request More Information

By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.