66e308dbd49da9fa4a22b91a Methods
  1. Motion
  2. Robotics

Methods Machine Tools enhances EDM by adding cobot for unattended production

Sept. 12, 2024
Technical Sales Director Bill Burba walks us through the RoboCut CiC Series Wire EDM during IMTS 2024

The RoboCut CiC Series Wire EDM features a Fanuc 31i-WB control with iHMI user interface with more than 4,700 technologies that, when coupled with a Fanuc CRX robot, can perform unattended production on the machine and any other Fanuc-controlled machines using Macros to create a mobile plug-and-play integration.

Continue Reading

Sponsored Recommendations

Enhancing HMI Security and Accessibility with Cloud VPN Solutions

Enhance HMI security and remote access with Beijer’s cloud VPN solution. Enjoy advanced encryption, easy setup, and secure access via laptops, smartphones, or tablets. Cut costs...

Motor Encoders: What They Are and How They Work

Motor encoders are rotary encoders adapted to provide information about an electric motor shaft's speed and/or position. Like rotary encoders, motor encoders are most commonly...

C-Face Solutions for Motor Feedback

EPC's C-face encoders use an internal flex mount that accommodates shaft run-out while maintaining alignment.

Selecting Digital Encoder Outputs

Closed-loop feedback is where the encoder signals control the motor without any user inputs. Open loop feedback is where the encoder signal runs to a display and the user adjusts...