Wireless HMIs bring machine control and troubleshooting to the point of use

Why tablets and smartphones are becoming essential tools for machine troubleshooting

Key Highlights

  • Wireless HMIs, tablets and smartphones enable operators and maintenance technicians to access machine controls and diagnostic information without returning to a fixed operator station.
  • Portable HMIs can simplify machine changeovers by providing location-specific instructions, photographs and adjustment information directly at the point of use.
  • Role-based access, remote connectivity and strategically located charging stations can support the practical deployment of mobile HMIs in industrial environments.

The human-machine interface has come a long way from the days of pushbuttons, selector switches and indicator lights. High-resolution touchscreens give operators, maintenance technicians and engineers access to detailed machine information, graphical navigation and sophisticated control functions. However, as HMIs have become more capable, one limitation has remained: The operator often must return to a fixed location to interact with the machine. Wireless technology, tablets and smartphones are changing that relationship by bringing machine information and control functions directly to the point of use.

One method I ran into a few years ago involved a vendor offering a means to connect through a virtual private network (VPN) to the operator station on the machine, assuming it was accessible through a broader network or wireless access point, and interact with the HMI from my laptop as if I were standing right there at the panel.

This was handy, as I could log into that HMI from my desk or home and navigate through the application as if I were there.

Taking it a step further, that same remote-access infrastructure could allow a browser-equipped device to perform the same function. That feature meant that I could use my tablet or smartphone to remotely monitor the machine and, where permitted, operate it or change parameters.

Care must be taken, of course, to ensure that remote access and control functions are implemented safely. Visual contact with the machine may be important, but it is not a substitute for appropriate safeguards, access controls and risk assessment.

The concept of wireless HMIs has far-reaching impacts. Literally.

Some machines and many processes are large, too large to consider multiple operator stations for logistical reasons. The cost of power and communication cables over greater distances can make this option difficult to justify.

With the advent of tablets, we have an option to deploy more visual interfaces at advantageous points around our control systems. The same technology that we have in a smartphone gives us a handheld device about the same size as the HMI devices that we have been deploying on machines for decades.

One advantage of these devices, particularly industrial-rated models, is that they can be designed to withstand the abuse they might suffer while being used around machinery or placed in holders on the machine.

With appropriately sealed enclosures to protect against dust and moisture, a tablet is literally that HMI of long ago that I’ve lamented not being able to pull off the panel and carry around with me.

Where once it might have been prohibitive to mount a second operator station on a machine, we could now deploy three, four or more wireless interfaces with a relatively minimal impact on installation costs.

Get your subscription to Control Design’s daily newsletter.

Each tablet can have an application that is limited to the role of the person holding it. Operators access operation screens, maintenance technicians get troubleshooting tools, and engineers get access to deeper diagnostic and connectivity functions.

One application of particular interest to machine builders is the ability to display and use changeover guides that are customized to the machine and the product being set up to run on it.

With high-resolution graphics, we have the ability to provide not only a text description of the changeover point but also an actual picture, taken from that exact location on the machine, to guide the operator through the correct adjustment.

Rather than having these instructions reside on the main operator station and requiring the operator to continuously go back and forth to the screen to get the next instructions, the handheld tablet or smartphone can be carried from one point to the next as the operator makes their way through the machine changeover.

The time saved by eliminating trips back and forth to the screen for confirmation and the next adjustment point can significantly reduce the time required to change the machine over to the next product and get it back into service.

While wireless technology is the key driver in this evolution, it is worth remembering that wireless smart devices still need to be parked for a while to recharge their batteries.

Since the operator or technician doesn't need to be holding the device all the time, a convenient charging station, or several, located in appropriate places can be worked into the control design so that the devices are always ready to perform their functions when needed.

Using smartphones, or their bigger siblings, tablets, in this manner would have been difficult to imagine not so long ago. However, it will be harder still to avoid considering them in your next control design.

A maintenance technician lying on their back under a machine will thank you when they can trigger a sensor and monitor the signal back at the PLC on their smartphone.

About the Author

Rick Rice

Rick Rice

Contributing Editor

Rick Rice is a controls engineer at Trew Automation, a material handling manufacturer based in West Chester, Ohio. With over 38 years’ experience in the field of automation, Rice has designed and programmed everything from automotive assembly, robots, palletizing and depalletizing equipment, conveyors and forming machines for the plastics industry but most of his career has focused on OEM in the packaging machinery industry with a focus on R&D for custom applications. 

Sign up for our eNewsletters
Get the latest news and updates