Opto 22

Products

Firmware versions 3.4 for the groov EPIC edge programmable industrial controller and firmware version 3.4 for the RIO edge I/O module add more capabilities for sharing OT data...
July 15, 2022
The groov EPIC processor, GRV-EPIC-PR2 (PR2), and RIO edge I/O module, GRV-R7-MM2001-10 (MM2), both ship with Inductive Automation’s Ignition Edge 8.1 preinstalled and include...
Aug. 14, 2021
The groov Epic processor, GRV-EPIC-PR2 (PR2), and Rio edge I/O module, GRV-R7-MM2001-10 (MM2), both ship with Inductive Automation’s IIoT/SCADA platform Ignition Edge 8.1 preinstalled...
April 26, 2021
The groov RIO family of intelligent, distributed I/O for IIoT and automation applications connects traditional wired switches and sensors directly to Ethernet networks, software...
May 25, 2020
Version 1.5.0 of groov EPIC firmware adds visualization and storage options
March 3, 2020
Groov Epic version 1.5.0 increases visualization and storage options to suit a wider variety of applications and hardware
Jan. 19, 2020
These three groov Epic I/O modules meet precise requirements for temperature control applications
Nov. 30, 2019
Firmware update 1.4.1 for the groov EPIC edge programmable industrial controller expands the capabilities of this next-generation industrial control system
Oct. 21, 2019
The groov EPIC integrates the HMI software groov View with its control programs
May 30, 2019
The groov EPIC system combines I/O, control, data processing and visualization into one secure, maintainable, edge-of-network industrial system
July 20, 2018

Additional content from Opto 22

The PAC Project Software Suite R10 supports the groov EPIC system, adds eight control commands and provides the ability to designate individual I/O and variable tags as Public...
July 8, 2018
The Groov Epic system combines modular intelligent I/O, a real-time Linux-based automation controller and edge gateway in a stainless-steel chassis
April 18, 2018
Groov 3.4 allows operators to trend more data over a longer period—up to five years
Sept. 23, 2017
The Snap-AIMA-iH analog input module and Snap-AOA-23-iH output module use the HART communications protocol to extract status, diagnostics and other information from smart devices...
July 17, 2017
The Node-RED development environment now runs on the groov Box industrial appliance
May 15, 2017
The Snap PAC system integrates hardware and software for IIoT, industrial control, remote monitoring and data acquisition applications
April 11, 2017
A digital I/O carrier board is available for the Raspberry Pi single-board computer, enabling the Pi to sense or switch up to 16 individually selectable electrical loads ranging...
March 23, 2017
Node-RED nodes are available for Opto 22’s industrial programmable automation controllers (PACs)
Jan. 23, 2017
Node-RED nodes for PACs make it easier to prototype and develop applications for connecting physical assets to cloud applications.
Aug. 16, 2016
Software suite includes IIoT integration through a RESTful API to controller tags and I/O.
July 28, 2016
Snap-UDC-HDB-G4 and Snap-UDC-HDB breakout boards boost the capabilities of 32-point Snap digital I/O modules, simplify field wiring and save panel space
July 27, 2016
A web-based, mobile operator interface system, groov connects sensors, equipment and control systems to smartphones and tablets for secure monitoring and control
May 20, 2016