Search sponsored by
About Opto 22
More Info on Opto 22
Products & Press Releases
groov EPIC and RIO firmware
July 15, 2022
Firmware versions 3.4 for the groov EPIC edge programmable industrial controller and firmware version 3.4 for the RIO edge I/O module add more capabilities for sharing OT data...
Opto 22 Processor and I/O module with preinstalled edge software
Aug. 14, 2021
The groov EPIC processor, GRV-EPIC-PR2 (PR2), and RIO edge I/O module, GRV-R7-MM2001-10 (MM2), both ship with Inductive Automation’s Ignition Edge 8.1 preinstalled and include...
Opto 22 Processor and I/O module with preinstalled IIoT/SCADA platform
April 26, 2021
The groov Epic processor, GRV-EPIC-PR2 (PR2), and Rio edge I/O module, GRV-R7-MM2001-10 (MM2), both ship with Inductive Automation’s IIoT/SCADA platform Ignition Edge 8.1 preinstalled...
Opto 22 I/O for IIoT connection
May 25, 2020
The groov RIO family of intelligent, distributed I/O for IIoT and automation applications connects traditional wired switches and sensors directly to Ethernet networks, software...
Opto 22 Firmware with visualization features and storage support
March 3, 2020
Version 1.5.0 of groov EPIC firmware adds visualization and storage options
Opto 22 Firmware with additional visualization and storage options
Jan. 19, 2020
Groov Epic version 1.5.0 increases visualization and storage options to suit a wider variety of applications and hardware
Opto 22 I/O modules for temperature control applications
Nov. 30, 2019
These three groov Epic I/O modules meet precise requirements for temperature control applications
Opto 22 Firmware with secure remote access using VPN technology
Oct. 21, 2019
Firmware update 1.4.1 for the groov EPIC edge programmable industrial controller expands the capabilities of this next-generation industrial control system
Opto 22 Integrated HMI with IEC 61131-3 capabilities
May 30, 2019
The groov EPIC integrates the HMI software groov View with its control programs
Opto 22 I/O, control, data processing and visualization in one system
July 20, 2018
The groov EPIC system combines I/O, control, data processing and visualization into one secure, maintainable, edge-of-network industrial system
All content from Opto 22
Opto 22 Project software suite
July 8, 2018
The PAC Project Software Suite R10 supports the groov EPIC system, adds eight control commands and provides the ability to designate individual I/O and variable tags as Public...
Opto 22 Edge programmable industrial controller
April 18, 2018
The Groov Epic system combines modular intelligent I/O, a real-time Linux-based automation controller and edge gateway in a stainless-steel chassis
Opto 22 Mobile operator interface system with advanced trending
Sept. 23, 2017
Groov 3.4 allows operators to trend more data over a longer period—up to five years
Opto 22 I/O with HART communications protocol
July 17, 2017
The Snap-AIMA-iH analog input module and Snap-AOA-23-iH output module use the HART communications protocol to extract status, diagnostics and other information from smart devices...
Opto 22 Industrial HMI/dashboard/data logging with Node-RED
May 15, 2017
The Node-RED development environment now runs on the groov Box industrial appliance
Opto 22 System for control, monitoring and acquisition applications
April 11, 2017
The Snap PAC system integrates hardware and software for IIoT, industrial control, remote monitoring and data acquisition applications
Opto 22 Digital I/O carrier board for Raspberry Pi
March 23, 2017
A digital I/O carrier board is available for the Raspberry Pi single-board computer, enabling the Pi to sense or switch up to 16 individually selectable electrical loads ranging...
Opto 22 Nodes for industrial PACs
Jan. 23, 2017
Node-RED nodes are available for Opto 22’s industrial programmable automation controllers (PACs)
Opto 22 Node-RED Nodes for PACs
Aug. 16, 2016
Node-RED nodes for PACs make it easier to prototype and develop applications for connecting physical assets to cloud applications.
Load More Content